What other controllers have that Smoothie does not
A survey of 39 controllers across CNC mills, lasers, 3D printers, lathes, vinyl cutters, pick-and-place and industrial motion, compared with Smoothieboard V1 and especially V2. Controller features come first; display and host-software features are kept apart in their own section.
Chapter 1 — 2026-11-19 — Initial survey and ranked gap list
Request, verbatim
ok I want you to research what features controllers for cnc mills, laser cutters, 3D printers, lathes, vinyl cutters, pick and place and other machines, support. I want you to search this for open source controllers, and for super expensive industrial controllers, and for anything in between. I want you to also do the same search for the smoothieboard controller (both verdsions, but v2 is most important). and I want yout o create inside of docs/, a html page where you list all the features that are present in other systems but not in smoothie, ordered by how important/desired by the customers you think they are, and grouped into categories: by type of machine, and also separately by type of feature. research in depth, but don't use a dynamic workflow. make the html page dark mode, easy to follow and read, and then give me the xdg-open command to open it.
research at least 35 system, only 10 maximum of them are open source projects.
oh also there are two types of features, features that are features of the controller propoer, and features that are features of it's "display" or it's "host software", we want to concentrate on the controller features here, though still collect the display/host ones too and have them in a separate section
Session transcript: /home/arthur/.claude/projects/-home-arthur-dev-smoothieware-smoothie-documentation/2c4c722f-376c-4362-ab60-26c8a3e0d10c.jsonl
The second and third prompts were sent while the first was being worked on and are quoted in the order received.
firmware-source-mirrors (folder dated 2025-11-05, may lag upstream) and the official wiki; entries marked unverified were not confirmed. Source links are shown as plain text because docs pages may not link to the internet.Top 15 controller gaps, most wanted first
Ordered by demand score, then by how many researched systems have it. Click a name for details.
Controller features grouped by machine type
Each feature appears under every machine type it applies to. Rows: ● demand, then V2 / V1 status, then retrieved-systems + general-knowledge systems (?).
CNC mills & routers32 featurestop: Parameters, variables, expressions and full O-word flow control, Automatic tool changer, Spindle control module
Parameters, variables, expressions and full O-word flow control●●●●●V2: partialV1: missing6+2?
Why it matters: Variables and conditionals are the base layer for probing routines, tool-change macros and parametric parts; Fanuc Macro B, Haas and LinuxCNC all rely on them.
In Smoothie: V2 implements O-word sub/endsub/call only: no parameters, expressions, conditionals or loops (subroutines page).
Automatic tool changer (M6 sequence, magazine types, tool table)●●●●●V2: missingV1: missing5+6?
Why it matters: Tool changers are the top upgrade path from hobby to production milling; MASSO ships built-in logic for linear, umbrella, pop-up and rotary magazines.
In Smoothie: M6 in both versions only selects an extruder tool (V2 Extruder::handle_M6). There is no spindle-tool logic.
Spindle control module: PWM, analog, VFD over Modbus/RS-485, RPM feedback●●●●●V2: missingV1: has it4+5?
Why it matters: Every mill and router needs spindle speed control; VFD-over-RS-485 is the normal way to run a 2 to 5 kW spindle. This is a V1-to-V2 regression, so it is cheap to explain to users.
In Smoothie: V1 source has PWM, analog, Huanyang and Modbus spindle modules. V2 has no spindle module; M3/M5 only keep the S value, and the V2 config comparison lists Modbus spindle control as removed.
Input shaping / vibration cancellation●●●●●V2: missingV1: missing3+0?
Why it matters: The most-requested 3D printer motion feature of the last few years: faster prints without ringing. Also relevant to fast gantry and pick-and-place heads.
In Smoothie: No input shaping in V1 or V2 source (grep found none).
Tool table with tool length offsets (G43 H), wear offsets, tool data management●●●●●V2: partialV1: partial3+4?
Why it matters: Without a tool table, every tool swap means re-zeroing or editing G-code. Shop-floor users in a CTE poll listed missing tool data management as a common complaint.
In Smoothie: G43/G49 exist in both V1 and V2 source. V2 handles only G43.1/G43.2 dynamic offsets typed in the line; there is no stored tool table.
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
Closed-loop servo / encoder feedback and real-time buses (EtherCAT, CANopen, CAN-FD)●●●●○V2: missingV1: missing7+2?
Why it matters: Servo machines are the natural upgrade for production routers and mills; every industrial controller in the survey supports drive buses.
In Smoothie: Step/direction only. V2 Pro, which planned an FPGA for megahertz steps, was cancelled.
User-selectable path control: exact stop, blending tolerance (G61/G64), corner smoothing●●●●○V2: partialV1: partial7+0?
Why it matters: Lets users choose between accuracy and speed per job; industrial controls sell this as AI contour control, SSS control and seamless corner control.
In Smoothie: Look-ahead with junction handling exists; there is no G61/G64 or tolerance parameter.
Built-in probing cycles (edge, bore, boss, length, wear update)●●●●○V2: partialV1: partial6+1?
Why it matters: Probing cycles cut setup time; Haas WIPS, Heidenhain native cycles and MASSO and Centroid probe routines are major selling points.
In Smoothie: G38.2 to G38.5 exist, plus three bed-leveling strategies. No edge/bore/corner cycles; they depend on macros, which in turn depend on variables.
Embedded scripting for user logic (Lua, Python, Forth)●●●●○V2: in progress / proposalV1: missing6+0?
Why it matters: Scripting is how Mach4 and MASSO users add custom tool changers, probing and interlocks without waiting for firmware features.
In Smoothie: V2 has an experimental Forth branch for the M4 core; a Lua plan exists in this workspace (lua-scripting.md) but is a proposal, not a feature.
Integrated PLC / ladder logic for machine interlocks●●●●○V2: in progress / proposalV1: missing4+2?
Why it matters: Machines with coolant, door, lubrication and tool-changer interlocks need logic that runs independent of the G-code stream.
In Smoothie: No PLC engine. A ladder-language proposal exists in this workspace (ladder-language-proposal.md); the switch module and button box cover simple cases.
Rigid (synchronized) tapping, G33.1●●●●○V2: missingV1: missing3+0?
Why it matters: Tapping with a floating holder is slow and breaks taps; rigid tapping is a standard mill feature.
In Smoothie: V2 has G33 spindle-synchronized motion in the lathe module but no tapping cycle.
Cutter radius compensation (G41/G42) and tool-nose compensation●●●●○V2: missingV1: missing2+6?
Why it matters: On-machine compensation lets operators correct for cutter wear without regenerating G-code; Grbl users call it crucial in the long-running Grbl issue thread.
In Smoothie: Not implemented in V1 or V2 (no G41/G42 handler). CAM post-processors can pre-offset toolpaths as a workaround.
Jerk-limited (S-curve) acceleration●●●●○V2: in progress / proposalV1: missing2+4?
Why it matters: Smoother moves, less machine stress and higher usable acceleration; standard on servo motion controllers.
In Smoothie: The project TODO lists S-curve planning; the page contradicts itself on whether V2 has it.
Power-loss recovery and resume job from line N●●●●○V2: unverifiedV1: unverified2+1?
Why it matters: Long jobs are expensive to restart; Marlin lists power-loss recovery and Ruida controllers advertise it.
In Smoothie: Not found in V2 source; not confirmed absent in V1.
Safety-rated functions (dual-channel e-stop, safe torque off, door interlock)●●●●○V2: partialV1: partial2+2?
Why it matters: Required for machines used commercially; Fanuc advertises Dual Check Safety, grblHAL has door and e-stop inputs.
In Smoothie: Kill, suspend and fault inputs via the Button Box (V2). No safety-rated architecture is claimed.
Real-time feed, rapid and spindle overrides during a run●●●●○V2: partialV1: partial0+6?
Why it matters: Operators tune feed on the first part of every new program; overrides are expected on mills and routers.
In Smoothie: M220 speed factor exists; real-time feed hold and cycle start (! and ~) were merged into V2 in 2026. A full real-time override set was not verified.
5-axis: tool center point (RTCP), tilted working plane, 5-axis kinematics●●●○○V2: missingV1: missing8+0?
Why it matters: A small share of hobbyists but a defining feature of industrial controls; Syntec and Delta sell RTCP into the router market.
In Smoothie: Kinematics in V2: Cartesian, CoreXY (hbot), CoreXZ, linear delta, SCARA, rotary delta. No 5-axis or TCP.
More than four axes, dedicated rotary axes (A/B/C) and 6+ axis machines●●●○○V2: partialV1: partial4+0?
Why it matters: Rotary 4th and 5th axes are a common retrofit; grblHAL and MASSO advertise ABC support directly.
In Smoothie: V1: 6-axis via the extruder module. V2 Prime has 4 onboard drivers; V1 5X has 5; external-driver configs exist.
User-defined M-codes and event macros, remapping●●●○○V2: partialV1: partial4+1?
Why it matters: Lets integrators add coolant, air assist or tool-change steps without recompiling firmware.
In Smoothie: The switch module binds M-codes to outputs; V2 subroutines add named macros. No remapping of M6 or event hooks.
Collision avoidance with a machine model●●●○○V2: missingV1: missing3+0?
Why it matters: Protects expensive machines from operator mistakes; Okuma can stop within 2 mm of a collision.
In Smoothie: None.
Full canned-cycle set: G73, G84 tapping, G85-G89 boring●●●○○V2: partialV1: partial3+2?
Why it matters: Reduces program length and CAM dependence for drilling and boring.
In Smoothie: Drilling cycles G80-G83, G98, G99 exist in V1 and V2; the others do not.
Full work-offset set: G59.1-G59.3, G52, G92.x, G10 L10/L11, G53 with moves●●●○○V2: partialV1: unverified3+0?
Why it matters: Shop users juggle many fixtures; a CTE poll lists inadequate work offsets among control complaints.
In Smoothie: V2 source registers G54-G59; G53 with axis words prints a warning that it is unsupported.
Large look-ahead buffer for dense CAM paths●●●○○V2: partialV1: partial3+0?
Why it matters: Dense CAM toolpaths need deep look-ahead to keep feed; Hurco quotes up to 10,000 blocks.
In Smoothie: V2 planner queue defaults to 32 blocks (planner_queue_size).
Adaptive feed, spindle-load monitoring, chatter detection●●●○○V2: missingV1: missing2+0?
Why it matters: Protects tools and finish; Heidenhain AFC and Okuma Machining Navi are headline options.
In Smoothie: None.
Chaining and distributed controllers (multi-MCU, CAN toolboards)●●●○○V2: in progress / proposalV1: in progress / proposal2+0?
Why it matters: Scales a machine past one board's driver count.
In Smoothie: Serial chaining is a TODO item with a written spec.
Thermal growth, pitch-error and volumetric compensation●●●○○V2: missingV1: missing2+2?
Why it matters: Needed for micron-level accuracy; Okuma and Aerotech sell it as a headline feature.
In Smoothie: None.
Wi-Fi / wireless connectivity on the controller; USB host and MTP●●●○○V2: partialV1: partial2+0?
Why it matters: Wireless file transfer is expected on modern controllers; MASSO and FluidNC include it.
In Smoothie: V2 has Ethernet, HTTP/WebSocket, FTP, network shell and NTP; USB host is work in progress and MTP is planned.
Backlash compensation●●●○○V2: in progress / proposalV1: in progress / proposal1+0?
Why it matters: Improves accuracy on belt and leadscrew machines without hardware changes; Marlin lists it with skew and X-twist compensation.
In Smoothie: Experimental V1 branch (not merged); V2 pull request #9 pending (new-features page).
Motion-synchronised auxiliary I/O (M62-M68), analog outputs●●●○○V2: partialV1: partial1+2?
Why it matters: Lets integrators fire air assist, coolant or plasma at exact moments in the path.
In Smoothie: Switch module covers on/off outputs; no M62-M68 family.
Splines, NURBS, helical arcs and inverse-time feed (G5, G5.1, G5.2, G93)●●○○○V2: missingV1: missing3+0?
Why it matters: Smooths CAM output and is needed for 5-axis inverse-time feed; low priority outside industrial use.
In Smoothie: No G5 or G93 handler.
Coordinate rotation, scaling and mirroring (G68, G50/G51)●●○○○V2: missingV1: missing2+2?
Why it matters: Useful for fixtures and job placement without regenerating G-code.
In Smoothie: No G50/G51 or G68; the rotatable-cartesian module covers a related case.
Lathes18 featurestop: Parameters, variables, expressions and full O-word flow control, Automatic tool changer, Spindle control module
Parameters, variables, expressions and full O-word flow control●●●●●V2: partialV1: missing6+2?
Why it matters: Variables and conditionals are the base layer for probing routines, tool-change macros and parametric parts; Fanuc Macro B, Haas and LinuxCNC all rely on them.
In Smoothie: V2 implements O-word sub/endsub/call only: no parameters, expressions, conditionals or loops (subroutines page).
Automatic tool changer (M6 sequence, magazine types, tool table)●●●●●V2: missingV1: missing5+6?
Why it matters: Tool changers are the top upgrade path from hobby to production milling; MASSO ships built-in logic for linear, umbrella, pop-up and rotary magazines.
In Smoothie: M6 in both versions only selects an extruder tool (V2 Extruder::handle_M6). There is no spindle-tool logic.
Spindle control module: PWM, analog, VFD over Modbus/RS-485, RPM feedback●●●●●V2: missingV1: has it4+5?
Why it matters: Every mill and router needs spindle speed control; VFD-over-RS-485 is the normal way to run a 2 to 5 kW spindle. This is a V1-to-V2 regression, so it is cheap to explain to users.
In Smoothie: V1 source has PWM, analog, Huanyang and Modbus spindle modules. V2 has no spindle module; M3/M5 only keep the S value, and the V2 config comparison lists Modbus spindle control as removed.
Tool table with tool length offsets (G43 H), wear offsets, tool data management●●●●●V2: partialV1: partial3+4?
Why it matters: Without a tool table, every tool swap means re-zeroing or editing G-code. Shop-floor users in a CTE poll listed missing tool data management as a common complaint.
In Smoothie: G43/G49 exist in both V1 and V2 source. V2 handles only G43.1/G43.2 dynamic offsets typed in the line; there is no stored tool table.
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
Built-in probing cycles (edge, bore, boss, length, wear update)●●●●○V2: partialV1: partial6+1?
Why it matters: Probing cycles cut setup time; Haas WIPS, Heidenhain native cycles and MASSO and Centroid probe routines are major selling points.
In Smoothie: G38.2 to G38.5 exist, plus three bed-leveling strategies. No edge/bore/corner cycles; they depend on macros, which in turn depend on variables.
Embedded scripting for user logic (Lua, Python, Forth)●●●●○V2: in progress / proposalV1: missing6+0?
Why it matters: Scripting is how Mach4 and MASSO users add custom tool changers, probing and interlocks without waiting for firmware features.
In Smoothie: V2 has an experimental Forth branch for the M4 core; a Lua plan exists in this workspace (lua-scripting.md) but is a proposal, not a feature.
Integrated PLC / ladder logic for machine interlocks●●●●○V2: in progress / proposalV1: missing4+2?
Why it matters: Machines with coolant, door, lubrication and tool-changer interlocks need logic that runs independent of the G-code stream.
In Smoothie: No PLC engine. A ladder-language proposal exists in this workspace (ladder-language-proposal.md); the switch module and button box cover simple cases.
Spindle-linked feed modes and lathe cycles: G95 feed/rev, G96 constant surface speed, G76 threading, G7/G8, G70-G73●●●●○V2: partialV1: missing4+0?
Why it matters: Lathe users expect constant surface speed and one-line threading cycles; MASSO, Centroid, LinuxCNC and grblHAL all provide them.
In Smoothie: V2 adds G33 threading and an Electronic Leadscrew (still labelled work in progress); no G95, G96, G76 or roughing/finishing cycles.
Rigid (synchronized) tapping, G33.1●●●●○V2: missingV1: missing3+0?
Why it matters: Tapping with a floating holder is slow and breaks taps; rigid tapping is a standard mill feature.
In Smoothie: V2 has G33 spindle-synchronized motion in the lathe module but no tapping cycle.
Cutter radius compensation (G41/G42) and tool-nose compensation●●●●○V2: missingV1: missing2+6?
Why it matters: On-machine compensation lets operators correct for cutter wear without regenerating G-code; Grbl users call it crucial in the long-running Grbl issue thread.
In Smoothie: Not implemented in V1 or V2 (no G41/G42 handler). CAM post-processors can pre-offset toolpaths as a workaround.
Safety-rated functions (dual-channel e-stop, safe torque off, door interlock)●●●●○V2: partialV1: partial2+2?
Why it matters: Required for machines used commercially; Fanuc advertises Dual Check Safety, grblHAL has door and e-stop inputs.
In Smoothie: Kill, suspend and fault inputs via the Button Box (V2). No safety-rated architecture is claimed.
Collision avoidance with a machine model●●●○○V2: missingV1: missing3+0?
Why it matters: Protects expensive machines from operator mistakes; Okuma can stop within 2 mm of a collision.
In Smoothie: None.
Full canned-cycle set: G73, G84 tapping, G85-G89 boring●●●○○V2: partialV1: partial3+2?
Why it matters: Reduces program length and CAM dependence for drilling and boring.
In Smoothie: Drilling cycles G80-G83, G98, G99 exist in V1 and V2; the others do not.
Adaptive feed, spindle-load monitoring, chatter detection●●●○○V2: missingV1: missing2+0?
Why it matters: Protects tools and finish; Heidenhain AFC and Okuma Machining Navi are headline options.
In Smoothie: None.
Thermal growth, pitch-error and volumetric compensation●●●○○V2: missingV1: missing2+2?
Why it matters: Needed for micron-level accuracy; Okuma and Aerotech sell it as a headline feature.
In Smoothie: None.
Backlash compensation●●●○○V2: in progress / proposalV1: in progress / proposal1+0?
Why it matters: Improves accuracy on belt and leadscrew machines without hardware changes; Marlin lists it with skew and X-twist compensation.
In Smoothie: Experimental V1 branch (not merged); V2 pull request #9 pending (new-features page).
Lathe C-axis, live tooling, polar interpolation●●●○○V2: missingV1: missing0+3?
Why it matters: Mill-turn work on a lathe.
In Smoothie: None.
Laser cutters & engravers15 featurestop: Soft limits, User-selectable path control, Embedded scripting for user logic
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
User-selectable path control: exact stop, blending tolerance (G61/G64), corner smoothing●●●●○V2: partialV1: partial7+0?
Why it matters: Lets users choose between accuracy and speed per job; industrial controls sell this as AI contour control, SSS control and seamless corner control.
In Smoothie: Look-ahead with junction handling exists; there is no G61/G64 or tolerance parameter.
Embedded scripting for user logic (Lua, Python, Forth)●●●●○V2: in progress / proposalV1: missing6+0?
Why it matters: Scripting is how Mach4 and MASSO users add custom tool changers, probing and interlocks without waiting for firmware features.
In Smoothie: V2 has an experimental Forth branch for the M4 core; a Lua plan exists in this workspace (lua-scripting.md) but is a proposal, not a feature.
Cutter radius compensation (G41/G42) and tool-nose compensation●●●●○V2: missingV1: missing2+6?
Why it matters: On-machine compensation lets operators correct for cutter wear without regenerating G-code; Grbl users call it crucial in the long-running Grbl issue thread.
In Smoothie: Not implemented in V1 or V2 (no G41/G42 handler). CAM post-processors can pre-offset toolpaths as a workaround.
Laser machine functions: Z autofocus, rotary attachment, framing, standalone job memory●●●●○V2: partialV1: partial2+0?
Why it matters: Standard on every Chinese CO2 controller; the main reason users pick a Ruida over a general board.
In Smoothie: A laser module with PWM power exists in V1 and V2. Autofocus, rotary-roller mapping and framing are not part of the module.
Power-loss recovery and resume job from line N●●●●○V2: unverifiedV1: unverified2+1?
Why it matters: Long jobs are expensive to restart; Marlin lists power-loss recovery and Ruida controllers advertise it.
In Smoothie: Not found in V2 source; not confirmed absent in V1.
Safety-rated functions (dual-channel e-stop, safe torque off, door interlock)●●●●○V2: partialV1: partial2+2?
Why it matters: Required for machines used commercially; Fanuc advertises Dual Check Safety, grblHAL has door and e-stop inputs.
In Smoothie: Kill, suspend and fault inputs via the Button Box (V2). No safety-rated architecture is claimed.
Real-time feed, rapid and spindle overrides during a run●●●●○V2: partialV1: partial0+6?
Why it matters: Operators tune feed on the first part of every new program; overrides are expected on mills and routers.
In Smoothie: M220 speed factor exists; real-time feed hold and cycle start (! and ~) were merged into V2 in 2026. A full real-time override set was not verified.
User-defined M-codes and event macros, remapping●●●○○V2: partialV1: partial4+1?
Why it matters: Lets integrators add coolant, air assist or tool-change steps without recompiling firmware.
In Smoothie: The switch module binds M-codes to outputs; V2 subroutines add named macros. No remapping of M6 or event hooks.
Large look-ahead buffer for dense CAM paths●●●○○V2: partialV1: partial3+0?
Why it matters: Dense CAM toolpaths need deep look-ahead to keep feed; Hurco quotes up to 10,000 blocks.
In Smoothie: V2 planner queue defaults to 32 blocks (planner_queue_size).
Fiber laser cutting process control: capacitive height following, staged piercing, per-stage power/frequency/gas●●●○○V2: missingV1: missing2+0?
Why it matters: Needed for sheet-metal laser cutting.
In Smoothie: None.
Wi-Fi / wireless connectivity on the controller; USB host and MTP●●●○○V2: partialV1: partial2+0?
Why it matters: Wireless file transfer is expected on modern controllers; MASSO and FluidNC include it.
In Smoothie: V2 has Ethernet, HTTP/WebSocket, FTP, network shell and NTP; USB host is work in progress and MTP is planned.
Motion-synchronised auxiliary I/O (M62-M68), analog outputs●●●○○V2: partialV1: partial1+2?
Why it matters: Lets integrators fire air assist, coolant or plasma at exact moments in the path.
In Smoothie: Switch module covers on/off outputs; no M62-M68 family.
Galvo scanner output and high-speed raster marking●●●○○V2: missingV1: missing0+3?
Why it matters: A separate market (laser marking) with its own controllers.
In Smoothie: None; not verified by retrieval.
Coordinate rotation, scaling and mirroring (G68, G50/G51)●●○○○V2: missingV1: missing2+2?
Why it matters: Useful for fixtures and job placement without regenerating G-code.
In Smoothie: No G50/G51 or G68; the rotatable-cartesian module covers a related case.
3D printers16 featurestop: Input shaping / vibration cancellation, Pressure advance / linear advance, Soft limits
Input shaping / vibration cancellation●●●●●V2: missingV1: missing3+0?
Why it matters: The most-requested 3D printer motion feature of the last few years: faster prints without ringing. Also relevant to fast gantry and pick-and-place heads.
In Smoothie: No input shaping in V1 or V2 source (grep found none).
Pressure advance / linear advance●●●●●V2: in progress / proposalV1: missing3+0?
Why it matters: Corner quality and ooze control for extrusion; ships by default in Klipper and Marlin.
In Smoothie: A pressure-advance project exists in this workspace (sibling folder pressure-advance/); it is not part of mainstream V1 or V2.
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
User-selectable path control: exact stop, blending tolerance (G61/G64), corner smoothing●●●●○V2: partialV1: partial7+0?
Why it matters: Lets users choose between accuracy and speed per job; industrial controls sell this as AI contour control, SSS control and seamless corner control.
In Smoothie: Look-ahead with junction handling exists; there is no G61/G64 or tolerance parameter.
Embedded scripting for user logic (Lua, Python, Forth)●●●●○V2: in progress / proposalV1: missing6+0?
Why it matters: Scripting is how Mach4 and MASSO users add custom tool changers, probing and interlocks without waiting for firmware features.
In Smoothie: V2 has an experimental Forth branch for the M4 core; a Lua plan exists in this workspace (lua-scripting.md) but is a proposal, not a feature.
Advanced bed meshing: adaptive mesh, UBL, axis-twist and skew compensation, babystepping●●●●○V2: partialV1: partial2+0?
Why it matters: Most Klipper and Marlin users run adaptive or unified meshes and live Z-offset adjustment.
In Smoothie: V2 has three-point, cartesian grid and delta grid strategies. No adaptive mesh, babystepping or skew compensation in source (grep found none).
Jerk-limited (S-curve) acceleration●●●●○V2: in progress / proposalV1: missing2+4?
Why it matters: Smoother moves, less machine stress and higher usable acceleration; standard on servo motion controllers.
In Smoothie: The project TODO lists S-curve planning; the page contradicts itself on whether V2 has it.
Power-loss recovery and resume job from line N●●●●○V2: unverifiedV1: unverified2+1?
Why it matters: Long jobs are expensive to restart; Marlin lists power-loss recovery and Ruida controllers advertise it.
In Smoothie: Not found in V2 source; not confirmed absent in V1.
Real-time feed, rapid and spindle overrides during a run●●●●○V2: partialV1: partial0+6?
Why it matters: Operators tune feed on the first part of every new program; overrides are expected on mills and routers.
In Smoothie: M220 speed factor exists; real-time feed hold and cycle start (! and ~) were merged into V2 in 2026. A full real-time override set was not verified.
User-defined M-codes and event macros, remapping●●●○○V2: partialV1: partial4+1?
Why it matters: Lets integrators add coolant, air assist or tool-change steps without recompiling firmware.
In Smoothie: The switch module binds M-codes to outputs; V2 subroutines add named macros. No remapping of M6 or event hooks.
Chaining and distributed controllers (multi-MCU, CAN toolboards)●●●○○V2: in progress / proposalV1: in progress / proposal2+0?
Why it matters: Scales a machine past one board's driver count.
In Smoothie: Serial chaining is a TODO item with a written spec.
Independent dual carriages, tool-changer macros, CAN toolheads●●●○○V2: partialV1: partial2+0?
Why it matters: Multi-material and multi-tool printers are a growth area.
In Smoothie: Multiple extruders and tool offsets exist. Mixing nozzles and chained tool boards are TODO items.
Wi-Fi / wireless connectivity on the controller; USB host and MTP●●●○○V2: partialV1: partial2+0?
Why it matters: Wireless file transfer is expected on modern controllers; MASSO and FluidNC include it.
In Smoothie: V2 has Ethernet, HTTP/WebSocket, FTP, network shell and NTP; USB host is work in progress and MTP is planned.
Backlash compensation●●●○○V2: in progress / proposalV1: in progress / proposal1+0?
Why it matters: Improves accuracy on belt and leadscrew machines without hardware changes; Marlin lists it with skew and X-twist compensation.
In Smoothie: Experimental V1 branch (not merged); V2 pull request #9 pending (new-features page).
Exclude object / cancel one part mid-print●●○○○V2: missingV1: missing1+0?
Why it matters: Saves failed multi-part plates.
In Smoothie: None.
Model-predictive heater control●●○○○V2: missingV1: missing1+0?
Why it matters: Faster, steadier hotend temperature; a Marlin headline feature.
In Smoothie: PID plus M303 autotune only.
Vinyl cutters & plotters3 featurestop: Registration-mark scanning and print-and-cut alignment, Blade offset, drag-knife and tangential knife control, force per tool, Soft limits
Registration-mark scanning and print-and-cut alignment (sensor or camera)●●●●●V2: missingV1: missing3+0?
Why it matters: The defining feature of contour-cutting vinyl cutters; Graphtec ARMS reads marks and repeats per copy.
In Smoothie: None.
Blade offset, drag-knife and tangential knife control, force per tool●●●●●V2: missingV1: missing1+2?
Why it matters: Determines cut quality at corners; tangential knives are a main product tier.
In Smoothie: None; support in the sources is anecdotal.
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
Pick & place10 featurestop: Parameters, variables, expressions and full O-word flow control, Pick-and-place I/O, Input shaping / vibration cancellation
Parameters, variables, expressions and full O-word flow control●●●●●V2: partialV1: missing6+2?
Why it matters: Variables and conditionals are the base layer for probing routines, tool-change macros and parametric parts; Fanuc Macro B, Haas and LinuxCNC all rely on them.
In Smoothie: V2 implements O-word sub/endsub/call only: no parameters, expressions, conditionals or loops (subroutines page).
Pick-and-place I/O: vacuum sensing and pick verification, nozzle changer, feeder control●●●●●V2: unverifiedV1: in progress / proposal5+0?
Why it matters: Core machine function; commercial machines list feeders and component verification as headline features.
In Smoothie: A separate PnP firmware fork exists (pnp-fork). OpenPnP uses G38.2 for probe-based pick detection and needs the PnP build for advanced motion.
Input shaping / vibration cancellation●●●●●V2: missingV1: missing3+0?
Why it matters: The most-requested 3D printer motion feature of the last few years: faster prints without ringing. Also relevant to fast gantry and pick-and-place heads.
In Smoothie: No input shaping in V1 or V2 source (grep found none).
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
Embedded scripting for user logic (Lua, Python, Forth)●●●●○V2: in progress / proposalV1: missing6+0?
Why it matters: Scripting is how Mach4 and MASSO users add custom tool changers, probing and interlocks without waiting for firmware features.
In Smoothie: V2 has an experimental Forth branch for the M4 core; a Lua plan exists in this workspace (lua-scripting.md) but is a proposal, not a feature.
Camera triggering and on-the-fly vision synchronised with motion●●●●○V2: unverifiedV1: missing2+0?
Why it matters: Flying-camera machines place faster; Juki uses laser centering.
In Smoothie: Not verified.
Jerk-limited (S-curve) acceleration●●●●○V2: in progress / proposalV1: missing2+4?
Why it matters: Smoother moves, less machine stress and higher usable acceleration; standard on servo motion controllers.
In Smoothie: The project TODO lists S-curve planning; the page contradicts itself on whether V2 has it.
More than four axes, dedicated rotary axes (A/B/C) and 6+ axis machines●●●○○V2: partialV1: partial4+0?
Why it matters: Rotary 4th and 5th axes are a common retrofit; grblHAL and MASSO advertise ABC support directly.
In Smoothie: V1: 6-axis via the extruder module. V2 Prime has 4 onboard drivers; V1 5X has 5; external-driver configs exist.
User-defined M-codes and event macros, remapping●●●○○V2: partialV1: partial4+1?
Why it matters: Lets integrators add coolant, air assist or tool-change steps without recompiling firmware.
In Smoothie: The switch module binds M-codes to outputs; V2 subroutines add named macros. No remapping of M6 or event hooks.
PnP-specific planner (no axis sync, per-axis profiles)●●●○○V2: unverifiedV1: in progress / proposal1+0?
Why it matters: Makes S-curve simpler on pick-and-place.
In Smoothie: TODO page idea.
Plasma / thermal cutting6 featurestop: Parameters, variables, expressions and full O-word flow control, Soft limits, Cutter radius compensation
Parameters, variables, expressions and full O-word flow control●●●●●V2: partialV1: missing6+2?
Why it matters: Variables and conditionals are the base layer for probing routines, tool-change macros and parametric parts; Fanuc Macro B, Haas and LinuxCNC all rely on them.
In Smoothie: V2 implements O-word sub/endsub/call only: no parameters, expressions, conditionals or loops (subroutines page).
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
Cutter radius compensation (G41/G42) and tool-nose compensation●●●●○V2: missingV1: missing2+6?
Why it matters: On-machine compensation lets operators correct for cutter wear without regenerating G-code; Grbl users call it crucial in the long-running Grbl issue thread.
In Smoothie: Not implemented in V1 or V2 (no G41/G42 handler). CAM post-processors can pre-offset toolpaths as a workaround.
Plasma torch height control (arc voltage), pierce delay, ohmic probing●●●●○V2: missingV1: missing2+1?
Why it matters: Plasma tables cannot cut cleanly without height control.
In Smoothie: None.
Safety-rated functions (dual-channel e-stop, safe torque off, door interlock)●●●●○V2: partialV1: partial2+2?
Why it matters: Required for machines used commercially; Fanuc advertises Dual Check Safety, grblHAL has door and e-stop inputs.
In Smoothie: Kill, suspend and fault inputs via the Button Box (V2). No safety-rated architecture is claimed.
Motion-synchronised auxiliary I/O (M62-M68), analog outputs●●●○○V2: partialV1: partial1+2?
Why it matters: Lets integrators fire air assist, coolant or plasma at exact moments in the path.
In Smoothie: Switch module covers on/off outputs; no M62-M68 family.
Other: 5-axis, industrial motion, general10 featurestop: Closed-loop servo / encoder feedback and real-time buses, Embedded scripting for user logic, Integrated PLC / ladder logic for machine interlocks
Closed-loop servo / encoder feedback and real-time buses (EtherCAT, CANopen, CAN-FD)●●●●○V2: missingV1: missing7+2?
Why it matters: Servo machines are the natural upgrade for production routers and mills; every industrial controller in the survey supports drive buses.
In Smoothie: Step/direction only. V2 Pro, which planned an FPGA for megahertz steps, was cancelled.
Embedded scripting for user logic (Lua, Python, Forth)●●●●○V2: in progress / proposalV1: missing6+0?
Why it matters: Scripting is how Mach4 and MASSO users add custom tool changers, probing and interlocks without waiting for firmware features.
In Smoothie: V2 has an experimental Forth branch for the M4 core; a Lua plan exists in this workspace (lua-scripting.md) but is a proposal, not a feature.
Integrated PLC / ladder logic for machine interlocks●●●●○V2: in progress / proposalV1: missing4+2?
Why it matters: Machines with coolant, door, lubrication and tool-changer interlocks need logic that runs independent of the G-code stream.
In Smoothie: No PLC engine. A ladder-language proposal exists in this workspace (ladder-language-proposal.md); the switch module and button box cover simple cases.
Jerk-limited (S-curve) acceleration●●●●○V2: in progress / proposalV1: missing2+4?
Why it matters: Smoother moves, less machine stress and higher usable acceleration; standard on servo motion controllers.
In Smoothie: The project TODO lists S-curve planning; the page contradicts itself on whether V2 has it.
Safety-rated functions (dual-channel e-stop, safe torque off, door interlock)●●●●○V2: partialV1: partial2+2?
Why it matters: Required for machines used commercially; Fanuc advertises Dual Check Safety, grblHAL has door and e-stop inputs.
In Smoothie: Kill, suspend and fault inputs via the Button Box (V2). No safety-rated architecture is claimed.
5-axis: tool center point (RTCP), tilted working plane, 5-axis kinematics●●●○○V2: missingV1: missing8+0?
Why it matters: A small share of hobbyists but a defining feature of industrial controls; Syntec and Delta sell RTCP into the router market.
In Smoothie: Kinematics in V2: Cartesian, CoreXY (hbot), CoreXZ, linear delta, SCARA, rotary delta. No 5-axis or TCP.
More than four axes, dedicated rotary axes (A/B/C) and 6+ axis machines●●●○○V2: partialV1: partial4+0?
Why it matters: Rotary 4th and 5th axes are a common retrofit; grblHAL and MASSO advertise ABC support directly.
In Smoothie: V1: 6-axis via the extruder module. V2 Prime has 4 onboard drivers; V1 5X has 5; external-driver configs exist.
Chaining and distributed controllers (multi-MCU, CAN toolboards)●●●○○V2: in progress / proposalV1: in progress / proposal2+0?
Why it matters: Scales a machine past one board's driver count.
In Smoothie: Serial chaining is a TODO item with a written spec.
Thermal growth, pitch-error and volumetric compensation●●●○○V2: missingV1: missing2+2?
Why it matters: Needed for micron-level accuracy; Okuma and Aerotech sell it as a headline feature.
In Smoothie: None.
Splines, NURBS, helical arcs and inverse-time feed (G5, G5.1, G5.2, G93)●●○○○V2: missingV1: missing3+0?
Why it matters: Smooths CAM output and is needed for 5-axis inverse-time feed; low priority outside industrial use.
In Smoothie: No G5 or G93 handler.
Controller features grouped by type of feature
Motion & path planning11 featurestop: Input shaping / vibration cancellation, User-selectable path control, Cutter radius compensation
Input shaping / vibration cancellation●●●●●V2: missingV1: missing3+0?
Why it matters: The most-requested 3D printer motion feature of the last few years: faster prints without ringing. Also relevant to fast gantry and pick-and-place heads.
In Smoothie: No input shaping in V1 or V2 source (grep found none).
User-selectable path control: exact stop, blending tolerance (G61/G64), corner smoothing●●●●○V2: partialV1: partial7+0?
Why it matters: Lets users choose between accuracy and speed per job; industrial controls sell this as AI contour control, SSS control and seamless corner control.
In Smoothie: Look-ahead with junction handling exists; there is no G61/G64 or tolerance parameter.
Cutter radius compensation (G41/G42) and tool-nose compensation●●●●○V2: missingV1: missing2+6?
Why it matters: On-machine compensation lets operators correct for cutter wear without regenerating G-code; Grbl users call it crucial in the long-running Grbl issue thread.
In Smoothie: Not implemented in V1 or V2 (no G41/G42 handler). CAM post-processors can pre-offset toolpaths as a workaround.
Jerk-limited (S-curve) acceleration●●●●○V2: in progress / proposalV1: missing2+4?
Why it matters: Smoother moves, less machine stress and higher usable acceleration; standard on servo motion controllers.
In Smoothie: The project TODO lists S-curve planning; the page contradicts itself on whether V2 has it.
Real-time feed, rapid and spindle overrides during a run●●●●○V2: partialV1: partial0+6?
Why it matters: Operators tune feed on the first part of every new program; overrides are expected on mills and routers.
In Smoothie: M220 speed factor exists; real-time feed hold and cycle start (! and ~) were merged into V2 in 2026. A full real-time override set was not verified.
5-axis: tool center point (RTCP), tilted working plane, 5-axis kinematics●●●○○V2: missingV1: missing8+0?
Why it matters: A small share of hobbyists but a defining feature of industrial controls; Syntec and Delta sell RTCP into the router market.
In Smoothie: Kinematics in V2: Cartesian, CoreXY (hbot), CoreXZ, linear delta, SCARA, rotary delta. No 5-axis or TCP.
More than four axes, dedicated rotary axes (A/B/C) and 6+ axis machines●●●○○V2: partialV1: partial4+0?
Why it matters: Rotary 4th and 5th axes are a common retrofit; grblHAL and MASSO advertise ABC support directly.
In Smoothie: V1: 6-axis via the extruder module. V2 Prime has 4 onboard drivers; V1 5X has 5; external-driver configs exist.
Full work-offset set: G59.1-G59.3, G52, G92.x, G10 L10/L11, G53 with moves●●●○○V2: partialV1: unverified3+0?
Why it matters: Shop users juggle many fixtures; a CTE poll lists inadequate work offsets among control complaints.
In Smoothie: V2 source registers G54-G59; G53 with axis words prints a warning that it is unsupported.
Large look-ahead buffer for dense CAM paths●●●○○V2: partialV1: partial3+0?
Why it matters: Dense CAM toolpaths need deep look-ahead to keep feed; Hurco quotes up to 10,000 blocks.
In Smoothie: V2 planner queue defaults to 32 blocks (planner_queue_size).
Splines, NURBS, helical arcs and inverse-time feed (G5, G5.1, G5.2, G93)●●○○○V2: missingV1: missing3+0?
Why it matters: Smooths CAM output and is needed for 5-axis inverse-time feed; low priority outside industrial use.
In Smoothie: No G5 or G93 handler.
Coordinate rotation, scaling and mirroring (G68, G50/G51)●●○○○V2: missingV1: missing2+2?
Why it matters: Useful for fixtures and job placement without regenerating G-code.
In Smoothie: No G50/G51 or G68; the rotatable-cartesian module covers a related case.
Accuracy & compensation4 featurestop: Advanced bed meshing, Adaptive feed, spindle-load monitoring, chatter detection, Thermal growth, pitch-error and volumetric compensation
Advanced bed meshing: adaptive mesh, UBL, axis-twist and skew compensation, babystepping●●●●○V2: partialV1: partial2+0?
Why it matters: Most Klipper and Marlin users run adaptive or unified meshes and live Z-offset adjustment.
In Smoothie: V2 has three-point, cartesian grid and delta grid strategies. No adaptive mesh, babystepping or skew compensation in source (grep found none).
Adaptive feed, spindle-load monitoring, chatter detection●●●○○V2: missingV1: missing2+0?
Why it matters: Protects tools and finish; Heidenhain AFC and Okuma Machining Navi are headline options.
In Smoothie: None.
Thermal growth, pitch-error and volumetric compensation●●●○○V2: missingV1: missing2+2?
Why it matters: Needed for micron-level accuracy; Okuma and Aerotech sell it as a headline feature.
In Smoothie: None.
Backlash compensation●●●○○V2: in progress / proposalV1: in progress / proposal1+0?
Why it matters: Improves accuracy on belt and leadscrew machines without hardware changes; Marlin lists it with skew and X-twist compensation.
In Smoothie: Experimental V1 branch (not merged); V2 pull request #9 pending (new-features page).
Spindle, tools & tool changing6 featurestop: Automatic tool changer, Spindle control module, Tool table with tool length offsets
Automatic tool changer (M6 sequence, magazine types, tool table)●●●●●V2: missingV1: missing5+6?
Why it matters: Tool changers are the top upgrade path from hobby to production milling; MASSO ships built-in logic for linear, umbrella, pop-up and rotary magazines.
In Smoothie: M6 in both versions only selects an extruder tool (V2 Extruder::handle_M6). There is no spindle-tool logic.
Spindle control module: PWM, analog, VFD over Modbus/RS-485, RPM feedback●●●●●V2: missingV1: has it4+5?
Why it matters: Every mill and router needs spindle speed control; VFD-over-RS-485 is the normal way to run a 2 to 5 kW spindle. This is a V1-to-V2 regression, so it is cheap to explain to users.
In Smoothie: V1 source has PWM, analog, Huanyang and Modbus spindle modules. V2 has no spindle module; M3/M5 only keep the S value, and the V2 config comparison lists Modbus spindle control as removed.
Tool table with tool length offsets (G43 H), wear offsets, tool data management●●●●●V2: partialV1: partial3+4?
Why it matters: Without a tool table, every tool swap means re-zeroing or editing G-code. Shop-floor users in a CTE poll listed missing tool data management as a common complaint.
In Smoothie: G43/G49 exist in both V1 and V2 source. V2 handles only G43.1/G43.2 dynamic offsets typed in the line; there is no stored tool table.
Spindle-linked feed modes and lathe cycles: G95 feed/rev, G96 constant surface speed, G76 threading, G7/G8, G70-G73●●●●○V2: partialV1: missing4+0?
Why it matters: Lathe users expect constant surface speed and one-line threading cycles; MASSO, Centroid, LinuxCNC and grblHAL all provide them.
In Smoothie: V2 adds G33 threading and an Electronic Leadscrew (still labelled work in progress); no G95, G96, G76 or roughing/finishing cycles.
Rigid (synchronized) tapping, G33.1●●●●○V2: missingV1: missing3+0?
Why it matters: Tapping with a floating holder is slow and breaks taps; rigid tapping is a standard mill feature.
In Smoothie: V2 has G33 spindle-synchronized motion in the lathe module but no tapping cycle.
Lathe C-axis, live tooling, polar interpolation●●●○○V2: missingV1: missing0+3?
Why it matters: Mill-turn work on a lathe.
In Smoothie: None.
Probing & measurement1 featurestop: Built-in probing cycles
Built-in probing cycles (edge, bore, boss, length, wear update)●●●●○V2: partialV1: partial6+1?
Why it matters: Probing cycles cut setup time; Haas WIPS, Heidenhain native cycles and MASSO and Centroid probe routines are major selling points.
In Smoothie: G38.2 to G38.5 exist, plus three bed-leveling strategies. No edge/bore/corner cycles; they depend on macros, which in turn depend on variables.
Programming, macros & scripting6 featurestop: Parameters, variables, expressions and full O-word flow control, Embedded scripting for user logic, Integrated PLC / ladder logic for machine interlocks
Parameters, variables, expressions and full O-word flow control●●●●●V2: partialV1: missing6+2?
Why it matters: Variables and conditionals are the base layer for probing routines, tool-change macros and parametric parts; Fanuc Macro B, Haas and LinuxCNC all rely on them.
In Smoothie: V2 implements O-word sub/endsub/call only: no parameters, expressions, conditionals or loops (subroutines page).
Embedded scripting for user logic (Lua, Python, Forth)●●●●○V2: in progress / proposalV1: missing6+0?
Why it matters: Scripting is how Mach4 and MASSO users add custom tool changers, probing and interlocks without waiting for firmware features.
In Smoothie: V2 has an experimental Forth branch for the M4 core; a Lua plan exists in this workspace (lua-scripting.md) but is a proposal, not a feature.
Integrated PLC / ladder logic for machine interlocks●●●●○V2: in progress / proposalV1: missing4+2?
Why it matters: Machines with coolant, door, lubrication and tool-changer interlocks need logic that runs independent of the G-code stream.
In Smoothie: No PLC engine. A ladder-language proposal exists in this workspace (ladder-language-proposal.md); the switch module and button box cover simple cases.
Power-loss recovery and resume job from line N●●●●○V2: unverifiedV1: unverified2+1?
Why it matters: Long jobs are expensive to restart; Marlin lists power-loss recovery and Ruida controllers advertise it.
In Smoothie: Not found in V2 source; not confirmed absent in V1.
User-defined M-codes and event macros, remapping●●●○○V2: partialV1: partial4+1?
Why it matters: Lets integrators add coolant, air assist or tool-change steps without recompiling firmware.
In Smoothie: The switch module binds M-codes to outputs; V2 subroutines add named macros. No remapping of M6 or event hooks.
Full canned-cycle set: G73, G84 tapping, G85-G89 boring●●●○○V2: partialV1: partial3+2?
Why it matters: Reduces program length and CAM dependence for drilling and boring.
In Smoothie: Drilling cycles G80-G83, G98, G99 exist in V1 and V2; the others do not.
Safety & I/O4 featurestop: Soft limits, Safety-rated functions, Collision avoidance with a machine model
Soft limits (software travel limits)●●●●●V2: missingV1: has it0+10?
Why it matters: Stops an overshoot or a bad G-code line from driving into the frame once the machine is homed. Present in nearly every hobby and industrial controller.
In Smoothie: V1 has soft_endstop settings. The V2 config comparison lists them as removed or undocumented.
Safety-rated functions (dual-channel e-stop, safe torque off, door interlock)●●●●○V2: partialV1: partial2+2?
Why it matters: Required for machines used commercially; Fanuc advertises Dual Check Safety, grblHAL has door and e-stop inputs.
In Smoothie: Kill, suspend and fault inputs via the Button Box (V2). No safety-rated architecture is claimed.
Collision avoidance with a machine model●●●○○V2: missingV1: missing3+0?
Why it matters: Protects expensive machines from operator mistakes; Okuma can stop within 2 mm of a collision.
In Smoothie: None.
Motion-synchronised auxiliary I/O (M62-M68), analog outputs●●●○○V2: partialV1: partial1+2?
Why it matters: Lets integrators fire air assist, coolant or plasma at exact moments in the path.
In Smoothie: Switch module covers on/off outputs; no M62-M68 family.
Drives, buses & multi-controller2 featurestop: Closed-loop servo / encoder feedback and real-time buses, Chaining and distributed controllers
Closed-loop servo / encoder feedback and real-time buses (EtherCAT, CANopen, CAN-FD)●●●●○V2: missingV1: missing7+2?
Why it matters: Servo machines are the natural upgrade for production routers and mills; every industrial controller in the survey supports drive buses.
In Smoothie: Step/direction only. V2 Pro, which planned an FPGA for megahertz steps, was cancelled.
Chaining and distributed controllers (multi-MCU, CAN toolboards)●●●○○V2: in progress / proposalV1: in progress / proposal2+0?
Why it matters: Scales a machine past one board's driver count.
In Smoothie: Serial chaining is a TODO item with a written spec.
Process-specific features13 featurestop: Pick-and-place I/O, Pressure advance / linear advance, Registration-mark scanning and print-and-cut alignment
Pick-and-place I/O: vacuum sensing and pick verification, nozzle changer, feeder control●●●●●V2: unverifiedV1: in progress / proposal5+0?
Why it matters: Core machine function; commercial machines list feeders and component verification as headline features.
In Smoothie: A separate PnP firmware fork exists (pnp-fork). OpenPnP uses G38.2 for probe-based pick detection and needs the PnP build for advanced motion.
Pressure advance / linear advance●●●●●V2: in progress / proposalV1: missing3+0?
Why it matters: Corner quality and ooze control for extrusion; ships by default in Klipper and Marlin.
In Smoothie: A pressure-advance project exists in this workspace (sibling folder pressure-advance/); it is not part of mainstream V1 or V2.
Registration-mark scanning and print-and-cut alignment (sensor or camera)●●●●●V2: missingV1: missing3+0?
Why it matters: The defining feature of contour-cutting vinyl cutters; Graphtec ARMS reads marks and repeats per copy.
In Smoothie: None.
Blade offset, drag-knife and tangential knife control, force per tool●●●●●V2: missingV1: missing1+2?
Why it matters: Determines cut quality at corners; tangential knives are a main product tier.
In Smoothie: None; support in the sources is anecdotal.
Camera triggering and on-the-fly vision synchronised with motion●●●●○V2: unverifiedV1: missing2+0?
Why it matters: Flying-camera machines place faster; Juki uses laser centering.
In Smoothie: Not verified.
Laser machine functions: Z autofocus, rotary attachment, framing, standalone job memory●●●●○V2: partialV1: partial2+0?
Why it matters: Standard on every Chinese CO2 controller; the main reason users pick a Ruida over a general board.
In Smoothie: A laser module with PWM power exists in V1 and V2. Autofocus, rotary-roller mapping and framing are not part of the module.
Plasma torch height control (arc voltage), pierce delay, ohmic probing●●●●○V2: missingV1: missing2+1?
Why it matters: Plasma tables cannot cut cleanly without height control.
In Smoothie: None.
Fiber laser cutting process control: capacitive height following, staged piercing, per-stage power/frequency/gas●●●○○V2: missingV1: missing2+0?
Why it matters: Needed for sheet-metal laser cutting.
In Smoothie: None.
Independent dual carriages, tool-changer macros, CAN toolheads●●●○○V2: partialV1: partial2+0?
Why it matters: Multi-material and multi-tool printers are a growth area.
In Smoothie: Multiple extruders and tool offsets exist. Mixing nozzles and chained tool boards are TODO items.
PnP-specific planner (no axis sync, per-axis profiles)●●●○○V2: unverifiedV1: in progress / proposal1+0?
Why it matters: Makes S-curve simpler on pick-and-place.
In Smoothie: TODO page idea.
Galvo scanner output and high-speed raster marking●●●○○V2: missingV1: missing0+3?
Why it matters: A separate market (laser marking) with its own controllers.
In Smoothie: None; not verified by retrieval.
Exclude object / cancel one part mid-print●●○○○V2: missingV1: missing1+0?
Why it matters: Saves failed multi-part plates.
In Smoothie: None.
Model-predictive heater control●●○○○V2: missingV1: missing1+0?
Why it matters: Faster, steadier hotend temperature; a Marlin headline feature.
In Smoothie: PID plus M303 autotune only.
Connectivity1 featurestop: Wi-Fi / wireless connectivity on the controller; USB host and MTP
Wi-Fi / wireless connectivity on the controller; USB host and MTP●●●○○V2: partialV1: partial2+0?
Why it matters: Wireless file transfer is expected on modern controllers; MASSO and FluidNC include it.
In Smoothie: V2 has Ethernet, HTTP/WebSocket, FTP, network shell and NTP; USB host is work in progress and MTP is planned.
Display and host-software features (separate from the controller)
These live in the panel, HMI, PC software or phone app rather than the motion controller. Same scoring as above.
By machine type
CNC mills & routers10 featurestop: Conversational / shop-floor programming, Web UI, remote monitoring, phone app, cloud, Guided probing, tool-setting and setup wizards
Conversational / shop-floor programming●●●●●V2: missingV1: missing8+0?
Why it matters: Lets machinists program without CAM; the most-cited missing feature in the CTE poll.
In Smoothie: None on the controller or the display.
Web UI, remote monitoring, phone app, cloud●●●●○V2: partialV1: partial4+0?
Why it matters: Remote monitoring is expected; the CTE poll lists missing web monitoring as a complaint.
In Smoothie: V2 serves HTTP and WebSocket; the UI is third-party.
Guided probing, tool-setting and setup wizards●●●●○V2: missingV1: missing3+0?
Why it matters: Turns probing cycles into a few taps.
In Smoothie: None.
Integrated touchscreen HMI with tool table and offset screens●●●●○V2: partialV1: partial3+0?
Why it matters: Single-box machines are easier to sell.
In Smoothie: Panels (RRD GLCD, Smoothie panel) and a V2 web interface exist; no integrated HMI.
Toolpath simulation, backplot and digital twin●●●●○V2: missingV1: missing2+2?
Why it matters: Catches crashes before cutting; Siemens sells a full virtual machine.
In Smoothie: None on the controller.
Onboard CAD/CAM, nesting, DXF and image import●●●○○V2: missingV1: missing3+0?
Why it matters: Removes the PC from the workflow; CypCut nests, Delta NC5 includes CAD/CAM.
In Smoothie: None.
Tool and job data management, ERP/MES connectivity●●●○○V2: missingV1: missing2+1?
Why it matters: Called out as a gap by shop users.
In Smoothie: None.
Wireless pendants and MPG handwheels with display●●●○○V2: partialV1: partial2+1?
Why it matters: Jogging while watching the cutter.
In Smoothie: V2 supports direct MPG axis control and shared handwheels.
Customisable screens and plug-in UI●●○○○V2: missingV1: missing3+0?
Why it matters: Integrators tailor the HMI; Mach4 and LinuxCNC ship screen editors.
In Smoothie: None.
File-based, multi-language panel menus●●○○○V2: in progress / proposalV1: in progress / proposal0+0?
Why it matters: Localisation and custom menus.
In Smoothie: TODO item.
Lathes7 featurestop: Conversational / shop-floor programming, Guided probing, tool-setting and setup wizards, Integrated touchscreen HMI with tool table and offset screens
Conversational / shop-floor programming●●●●●V2: missingV1: missing8+0?
Why it matters: Lets machinists program without CAM; the most-cited missing feature in the CTE poll.
In Smoothie: None on the controller or the display.
Guided probing, tool-setting and setup wizards●●●●○V2: missingV1: missing3+0?
Why it matters: Turns probing cycles into a few taps.
In Smoothie: None.
Integrated touchscreen HMI with tool table and offset screens●●●●○V2: partialV1: partial3+0?
Why it matters: Single-box machines are easier to sell.
In Smoothie: Panels (RRD GLCD, Smoothie panel) and a V2 web interface exist; no integrated HMI.
Toolpath simulation, backplot and digital twin●●●●○V2: missingV1: missing2+2?
Why it matters: Catches crashes before cutting; Siemens sells a full virtual machine.
In Smoothie: None on the controller.
Tool and job data management, ERP/MES connectivity●●●○○V2: missingV1: missing2+1?
Why it matters: Called out as a gap by shop users.
In Smoothie: None.
Wireless pendants and MPG handwheels with display●●●○○V2: partialV1: partial2+1?
Why it matters: Jogging while watching the cutter.
In Smoothie: V2 supports direct MPG axis control and shared handwheels.
Customisable screens and plug-in UI●●○○○V2: missingV1: missing3+0?
Why it matters: Integrators tailor the HMI; Mach4 and LinuxCNC ship screen editors.
In Smoothie: None.
Laser cutters & engravers3 featurestop: Camera and vision workflows, Web UI, remote monitoring, phone app, cloud, Onboard CAD/CAM, nesting, DXF and image import
Camera and vision workflows (laser alignment, print-and-cut, PnP vision)●●●●○V2: missingV1: missing4+0?
Why it matters: Camera alignment sells laser and vinyl machines; OpenPnP is built on it.
In Smoothie: Host-side only.
Web UI, remote monitoring, phone app, cloud●●●●○V2: partialV1: partial4+0?
Why it matters: Remote monitoring is expected; the CTE poll lists missing web monitoring as a complaint.
In Smoothie: V2 serves HTTP and WebSocket; the UI is third-party.
Onboard CAD/CAM, nesting, DXF and image import●●●○○V2: missingV1: missing3+0?
Why it matters: Removes the PC from the workflow; CypCut nests, Delta NC5 includes CAD/CAM.
In Smoothie: None.
3D printers3 featurestop: Web UI, remote monitoring, phone app, cloud, Accelerometer and calibration tools, File-based, multi-language panel menus
Web UI, remote monitoring, phone app, cloud●●●●○V2: partialV1: partial4+0?
Why it matters: Remote monitoring is expected; the CTE poll lists missing web monitoring as a complaint.
In Smoothie: V2 serves HTTP and WebSocket; the UI is third-party.
Accelerometer and calibration tools (input-shaper, resonance tests)●●●○○V2: missingV1: missing1+0?
Why it matters: Makes input shaping usable.
In Smoothie: None.
File-based, multi-language panel menus●●○○○V2: in progress / proposalV1: in progress / proposal0+0?
Why it matters: Localisation and custom menus.
In Smoothie: TODO item.
Vinyl cutters & plotters1 featurestop: Camera and vision workflows
Camera and vision workflows (laser alignment, print-and-cut, PnP vision)●●●●○V2: missingV1: missing4+0?
Why it matters: Camera alignment sells laser and vinyl machines; OpenPnP is built on it.
In Smoothie: Host-side only.
Pick & place1 featurestop: Camera and vision workflows
Camera and vision workflows (laser alignment, print-and-cut, PnP vision)●●●●○V2: missingV1: missing4+0?
Why it matters: Camera alignment sells laser and vinyl machines; OpenPnP is built on it.
In Smoothie: Host-side only.
Plasma / thermal cutting2 featurestop: Integrated touchscreen HMI with tool table and offset screens, Onboard CAD/CAM, nesting, DXF and image import
Integrated touchscreen HMI with tool table and offset screens●●●●○V2: partialV1: partial3+0?
Why it matters: Single-box machines are easier to sell.
In Smoothie: Panels (RRD GLCD, Smoothie panel) and a V2 web interface exist; no integrated HMI.
Onboard CAD/CAM, nesting, DXF and image import●●●○○V2: missingV1: missing3+0?
Why it matters: Removes the PC from the workflow; CypCut nests, Delta NC5 includes CAD/CAM.
In Smoothie: None.
Other: 5-axis, industrial motion, general1 featurestop: Toolpath simulation, backplot and digital twin
Toolpath simulation, backplot and digital twin●●●●○V2: missingV1: missing2+2?
Why it matters: Catches crashes before cutting; Siemens sells a full virtual machine.
In Smoothie: None on the controller.
By type of feature
Accuracy & compensation1 featurestop: Accelerometer and calibration tools
Accelerometer and calibration tools (input-shaper, resonance tests)●●●○○V2: missingV1: missing1+0?
Why it matters: Makes input shaping usable.
In Smoothie: None.
Probing & measurement1 featurestop: Guided probing, tool-setting and setup wizards
Guided probing, tool-setting and setup wizards●●●●○V2: missingV1: missing3+0?
Why it matters: Turns probing cycles into a few taps.
In Smoothie: None.
Programming, macros & scripting7 featurestop: Conversational / shop-floor programming, Integrated touchscreen HMI with tool table and offset screens, Toolpath simulation, backplot and digital twin
Conversational / shop-floor programming●●●●●V2: missingV1: missing8+0?
Why it matters: Lets machinists program without CAM; the most-cited missing feature in the CTE poll.
In Smoothie: None on the controller or the display.
Integrated touchscreen HMI with tool table and offset screens●●●●○V2: partialV1: partial3+0?
Why it matters: Single-box machines are easier to sell.
In Smoothie: Panels (RRD GLCD, Smoothie panel) and a V2 web interface exist; no integrated HMI.
Toolpath simulation, backplot and digital twin●●●●○V2: missingV1: missing2+2?
Why it matters: Catches crashes before cutting; Siemens sells a full virtual machine.
In Smoothie: None on the controller.
Onboard CAD/CAM, nesting, DXF and image import●●●○○V2: missingV1: missing3+0?
Why it matters: Removes the PC from the workflow; CypCut nests, Delta NC5 includes CAD/CAM.
In Smoothie: None.
Tool and job data management, ERP/MES connectivity●●●○○V2: missingV1: missing2+1?
Why it matters: Called out as a gap by shop users.
In Smoothie: None.
Customisable screens and plug-in UI●●○○○V2: missingV1: missing3+0?
Why it matters: Integrators tailor the HMI; Mach4 and LinuxCNC ship screen editors.
In Smoothie: None.
File-based, multi-language panel menus●●○○○V2: in progress / proposalV1: in progress / proposal0+0?
Why it matters: Localisation and custom menus.
In Smoothie: TODO item.
Safety & I/O1 featurestop: Wireless pendants and MPG handwheels with display
Wireless pendants and MPG handwheels with display●●●○○V2: partialV1: partial2+1?
Why it matters: Jogging while watching the cutter.
In Smoothie: V2 supports direct MPG axis control and shared handwheels.
Process-specific features1 featurestop: Camera and vision workflows
Camera and vision workflows (laser alignment, print-and-cut, PnP vision)●●●●○V2: missingV1: missing4+0?
Why it matters: Camera alignment sells laser and vinyl machines; OpenPnP is built on it.
In Smoothie: Host-side only.
Connectivity1 featurestop: Web UI, remote monitoring, phone app, cloud
Web UI, remote monitoring, phone app, cloud●●●●○V2: partialV1: partial4+0?
Why it matters: Remote monitoring is expected; the CTE poll lists missing web monitoring as a complaint.
In Smoothie: V2 serves HTTP and WebSocket; the UI is third-party.
What Smoothie V2 already has (not gaps)
- Slaved axes with independent alignment (G28.7), shared MPG hand wheel, Button Box inputs with KILL, SUSPEND and FAULT
- G33 spindle-synchronised motion and an Electronic Leadscrew (work in progress label upstream)
- Real-time feed hold and cycle start (V2 PR #8, merged 2026-08-17)
- G38.2 to G38.5 probing, three leveling strategies (three-point, cartesian grid, delta grid), delta calibration
- Drilling cycles G80-G83, G98, G99; tool length offsets G43.1/G43.2/G49 (dynamic)
- Six kinematics: Cartesian, CoreXY (hbot), CoreXZ, linear delta, SCARA, rotary delta
- O-word subroutines (define and call only), network shell, FTP, HTTP/WebSocket, NTP, over-the-air updates
- TMC2660/2590 drivers with StallGuard2 sensorless homing (needs tuning), 200 kHz step rate, 16-bit ADC, SDIO card
- Laser PWM module, temperature control, filament detector, MAX7219 DRO, ECCE editor, session history
Sources: smoothieware.org new-features and V2-differences pages, plus the V2 source snapshot.
Systems researched
Open-source rows have a green edge. Evidence “thin / none” means my searches returned little or nothing, so those systems are listed for transparency but not counted toward the 39.
Show the full list of 52 systems (10 open source)
| System | Vendor | Machines | Licence | Evidence | Where |
|---|---|---|---|---|---|
| LinuxCNC | community | CNC, Lathes, Plasma, Other: | open source | retrieved: substantial | linuxcnc.org/docs/html/ and /gcode/g-code.html (fetched) |
| grblHAL | community | CNC, Lathes, Laser | open source | retrieved: substantial | github.com/grblHAL/core (fetched); grbl-vs-grblhal docs page (search) |
| FluidNC | community | CNC, Laser | open source | retrieved: partial | search results: FluidNC / Grbl_ESP32 / Jackpot docs |
| Klipper | community | 3D | open source | retrieved: substantial | klipper3d.org/Features.html (fetched) |
| Marlin | community | 3D, Laser | open source | retrieved: partial | marlinfw.org/docs/features/lin_advance.html (fetched, incl. feature nav) |
| RepRapFirmware (Duet) | Duet3D | 3D, CNC, Laser, Pick | open source | retrieved: partial | search results: RRF releases, Duet forum, OpenPnP wiki |
| Grbl 1.1 | community | CNC, Laser | open source | retrieved: partial | grbl issue #385 (search); grblHAL comparison page |
| OpenPnP (host + firmware ecosystem) | community | Pick | open source | retrieved: partial | OpenPnP wiki, motion controllers page (search) |
| Machinekit | community | CNC, Lathes | open source | thin / none | only a lathe-user doc hit |
| TinyG / g2core | community | CNC, Pick | open source | thin / none | only an OpenPnP wiki remark |
| Fanuc 0i/30i/31i Plus | Fanuc | CNC, Lathes, Other: | proprietary | retrieved: substantial | fanuc.eu and fanucamerica.com 31i-B Plus pages (search) |
| Siemens Sinumerik 840D sl / ONE | Siemens | CNC, Lathes, Other: | proprietary | retrieved: partial | siemens.com Run MyVirtual Machine; catalog hits (search) |
| Heidenhain TNC 640 | Heidenhain | CNC, Other: | proprietary | retrieved: partial | TNC 640 brochure and cycle manuals (search) |
| Haas Next Generation Control | Haas | CNC, Lathes | proprietary | retrieved: partial | haascnc.com probe-system and control pages (search) |
| Okuma OSP-P300 | Okuma | CNC, Lathes | proprietary | retrieved: substantial | okuma.com / okuma.eu intelligent technology pages (search) |
| Hurco WinMax | Hurco | CNC | proprietary | retrieved: partial | hurco.com/technology/winmax (search) |
| Beckhoff TwinCAT CNC | Beckhoff | CNC, Laser, Other: | proprietary | retrieved: partial | beckhoff.com machine tools (search) |
| Mitsubishi M80 / M800 | Mitsubishi Electric | CNC, Lathes | proprietary | retrieved: partial | mitsubishielectric.com m800_m80 (search) |
| Mazak Smooth (SmoothX / SmoothAi) | Mazak | CNC, Lathes | proprietary | retrieved: partial | ctemag.com Smooth technology articles (search) |
| Mach3 | ArtSoft | CNC | proprietary | retrieved: partial | comparison pages (search) |
| Mach4 (Hobby / Industrial) | ArtSoft / Machsupport | CNC, Lathes, Plasma | proprietary | retrieved: partial | machmotion docs, Mach4 scripting manual (search) |
| UCCNC + UC100 | CNCdrive | CNC | proprietary | retrieved: partial | comparison pages (search) |
| Centroid Acorn / CNC12 | Centroid | CNC, Lathes | proprietary | retrieved: partial | Acorn probe and parameter docs (search) |
| MASSO G3 Touch | MASSO | CNC, Lathes, Plasma | proprietary | retrieved: substantial | docs.masso.com.au, controller portfolio (search) |
| Tormach PathPilot | Tormach (LinuxCNC-derived) | CNC, Lathes | proprietary | retrieved: partial | review snippet (search) |
| Weihong NcStudio | Weihong | CNC | proprietary | retrieved: partial | weihong.com.cn manuals (search) |
| Syntec | Syntec | CNC, Lathes | proprietary | retrieved: partial | Syntec RTCP manual, comparison blog (search) |
| LNC | LNC | CNC | proprietary | retrieved: partial | comparison blog (search) |
| Delta NC5 | Delta Electronics | CNC | proprietary | retrieved: partial | deltaww.com NC5 page (search) |
| Ruida RDC644x | Ruida | Laser | proprietary | retrieved: partial | LightBurn docs, laseruser and LightBurn forums (search) |
| Trocen AWC | Trocen | Laser | proprietary | retrieved: partial | LightBurn docs and forum (search) |
| Friendess FSCUT / CypCut / BCS100 | Friendess | Laser | proprietary | retrieved: partial | FSCUT manuals, CypCut manual excerpts (search) |
| Graphtec CE series | Graphtec | Vinyl | proprietary | retrieved: partial | graphtecamerica.com ARMS FAQ (search) |
| Roland CAMM-1 GX/GS | Roland DG | Vinyl | proprietary | retrieved: partial | signs101 and dealer pages (search) |
| Summa S One / S Class | Summa | Vinyl | proprietary | retrieved: partial | summa.com sensor-vs-camera blog (search) |
| Juki RX / KE | Juki | Pick | proprietary | retrieved: partial | electronicsb2b articles (search) |
| Yamaha YS / YRM | Yamaha Motor | Pick | proprietary | retrieved: partial | Yamaha SMT glossary (search) |
| Neoden 8 / YY1 | Neoden | Pick | proprietary | retrieved: partial | electronicsb2b articles (search) |
| Aerotech A3200 | Aerotech | Other:, Laser | proprietary | retrieved: partial | A3200 datasheets (search) |
| Galil DMC | Galil | Other: | proprietary | retrieved: partial | Galil catalog excerpts (search) |
| Delta Tau / Omron PMAC | Omron | Other: | proprietary | retrieved: partial | PMAC brochure (search) |
| Brother Speedio CNC-C00 | Brother | CNC | proprietary | thin / none | search returned nothing |
| Fagor 8070 | Fagor Automation | CNC, Lathes | proprietary | thin / none | search returned a panel-PC manual only |
| NUM Flexium | NUM | CNC, Other: | proprietary | thin / none | search returned nothing |
| Bosch Rexroth IndraMotion MTX | Bosch Rexroth | CNC, Other: | proprietary | thin / none | search returned nothing |
| PlanetCNC | PlanetCNC | CNC | proprietary | thin / none | name only |
| Carbide Motion (Shapeoko) | Carbide 3D | CNC | proprietary | thin / none | name only |
| Leetro MPC65xx | Leetro | Laser | proprietary | thin / none | only obsolescence and LightBurn-compatibility chatter |
| TopWisdom | TopWisdom | Laser | proprietary | thin / none | name only |
| ASM Siplace | ASM | Pick | proprietary | thin / none | one optimisation-software mention |
| Trumpf laser controls | Trumpf | Laser | proprietary | thin / none | search returned a Friendess integration note only |
| ACS SPiiPlus | ACS Motion Control | Other: | proprietary | thin / none | search returned a one-line blog mention |
Method and limits
How this was done and what could not be verified
- Fetched primary pages where possible (LinuxCNC G-code reference, grblHAL core README, Klipper features, Marlin feature pages, Smoothie wiki pages) and used web search results for the rest. Search results are weaker than manuals: several vendor claims come from marketing pages.
- Smoothie V1 status is from the V1 source snapshot (spindle modules, soft_endstop, toolmanager, G43/G49, M600) and the local V1-to-V2 comparison. V2 status is from the V2 source snapshot (registered G/M handlers, modules/tools list), the wiki and local proposal documents.
- Searches for Brother, Fagor, NUM, Bosch Rexroth, PlanetCNC, Carbide Motion, Leetro, TopWisdom, ASM Siplace, Trumpf and ACS returned little; they are listed but not counted. Galvo scanning, lathe C-axis and several vinyl-cutter details rest on general knowledge and are flagged.
- No source ranked features by customer demand. Scores weigh how many systems and machine types have the feature, how often users complain about its absence in sources found, and how much of Smoothie's target market needs it.
- Machine-readable copies:
controller-feature-gap-analysis/systems.csvandfeatures.csv.
Source index
NEWF | smoothieware.org/new-features |
DIFF | smoothieware.org/smoothieboard-v2-differences |
TODO | smoothieware.org/todo |
FORUM | forum.makerforums.info/t/smoothieware-smoothieboard-v2-features-and-hardware-update-spring-2026/94695 |
SRC1 | firmware-source-mirrors/Smoothieware-v1 (local snapshot; modules/tools/spindle, soft_endstop, toolmanager) |
SRC2 | firmware-source-mirrors/Smoothieware-v2 (local snapshot, folder dated 2025-11-05; may lag upstream) |
CMP | docs/config-comparison-v1-v2.md (local) |
SUBS | smoothieware-website-v1/docs/gcode-reference/subroutines.md (local) |
LUA | docs/lua-scripting.md (local proposal) |
LADDER | docs/ladder-language-proposal.md (local proposal) |
PA | sibling folder pressure-advance/ (local, not merged) |
ZPROBE | V2 source modules/tools/zprobe (local) |
LCNC | linuxcnc.org/docs/html/gcode/g-code.html and /docs/html/ |
GH | github.com/grblHAL/core |
KLIP | klipper3d.org/Features.html |
MARLIN | marlinfw.org/docs/features/lin_advance.html |
RRF | Duet3D RepRapFirmware release notes and forum (search results) |
FLUID | FluidNC / Grbl_ESP32 / Jackpot docs (search results) |
OPNP | openpnp-wiki.readthedocs.io Motion-Controllers page (search result) |
MASSO | docs.masso.com.au, masso.com.au portfolio (search results) |
MACH4 | support.machmotion.com Mach4 documentation (search results) |
CENTROID | Centroid Acorn probe and parameter documents (search results) |
FANUC | fanuc.eu 31i-B Plus and fanucamerica.com pages (search results) |
SIEM | siemens.com Run MyVirtual Machine and catalog (search results) |
HEID | Heidenhain TNC 640 brochure and manuals (search results) |
HAAS | haascnc.com probe-system pages (search results) |
OKUMA | okuma.com/blog/dont-crash-theres-a-cnc-control-for-that and okuma.eu (search results) |
HURCO | hurco.com/technology/winmax (search results) |
BECK | beckhoff.com machine tools (search results) |
MAZAK | ctemag.com Smooth technology articles (search results) |
MITSU | mitsubishielectric.com/fa/products/cnt/cnc/pmerit/cnc/m800_m80 (search result) |
SYNTEC | Syntec RTCP manual, Delta NC5 page (search results) |
DELTA | deltaww.com NC5 page (search result) |
RUIDA | LightBurn docs and forums, retailer listing (search results) |
LB | docs.lightburnsoftware.com Ruida/Trocen pages (search results) |
CYP | Friendess FSCUT / CypCut manuals (search results) |
GRAPH | graphtecamerica.com ARMS FAQ (search result) |
SUMMA | summa.com sensor-or-camera blog and signs101 threads (search results) |
ROLAND | signwarehouse.com guide (search result) |
JUKI | electronicsb2b.com pick-and-place articles (search results) |
YAMAHA | global.yamaha-motor.com SMT glossary (search result) |
NEODEN | electronicsb2b.com pick-and-place articles (search results) |
AERO | aerotech.com A3200 datasheets (search results) |
GALIL | Galil catalog excerpts and an engineer's review (search results) |
PMAC | assets.omron.com PMAC brochure (search result) |
GRBLISSUE | github.com/grbl/grbl/issues/385 (search result) |
CTE | ctemag.com/node/26805 'Poll reveals CNC likes and dislikes' (search result) |